This charter will be posted once a month to the group, if you do not wish to see / download this posting please set your message filters to ignore the subject line (which will not change). Charter as recorded at http://www.usenet.org.uk/ ====================================== Charter of uk.rec.video.digital (Not Moderated)

Hi, I've just bought a Sony TRV22 MiniDV camcorder. It's got one of those touch sensitive LCD screens. I noticed immediately that there is a small amount of flicker on the LCD menu buttons (mostly noticable when I am shooting a dark scene). The Video display looks fine, only the menu buttons and indicators on the LCD screen seem to be affected.

Hi I want to sell my InfoLithium QM91 battery. Its Sony brand new and never used. Send me an email if you are intereted. Just for you reference, QM91 is powerful battery and give you around 6 times more power than standard battery. Thanks

Anyone know where's a good place to get one. I see PlanetPC have them for 199 ex VAT, but I've not found anywhere else. Places like Kelkoo seem to return no hits. TIA.

Have had a TRV33E for 1 year now. Switching tapes over yesterday, the battery ran out as the new tape was being loaded. The mechanism made it far enough to open the DV tape flap but the tape has not been engaged. Even after reconnecting power and recharging the battery the mechanism does not engage when the power switch is turned on. All that happens is the screen flashes for a moment and the...

newsgroups trimmed Gordon Hudson wrote: I think the regularity of the edge of the hole makes a difference. I did quite a bit of work on this for a project a few years back and you're quite right. Thickness of material used is also critical, the thinner the better to avoid internal reflections. But the most important factor is the actual size of the pinhole in relation to the "focal

Im thinking of buying this camera as ive seen it for £150 at amazon.co.uk and has had great reviews,i want to be able to take short video clips and upload to my website(holiday villa for rent),i believe it uses quicktime format and has a resolution of 320 x 240,not brillant i know but im hoping this is still reasonable/watchable to view online,ill be using a 128 mmc card which im told will give...

Hi, this is the first time I have tried to copy, I have an error that says nero needs dvd compatible VOB IFO AND BUP files to create dvd. I have just had a phillips dvdrw416 installed, am running ME have 80gb drive, copied onto hard drive from sony trv238e thanks in advance.. I am not very techie either! -- pressing return will take you to spam trap. use sheila21ukATyahooDOTcom

I've been trying out neroexpress (current version from the ahead web site), and it seems to have a problem with one particular mpg file, and gives up part through the transcoding phase. I've added the relevant part of the log file at the end on the offchance anyone else can make something of it. I've put several videos onto dvd successfully; but it's just this one one particular piece of...

can anyone tell me if there is any good software or program for recording tv my computer. thnks

Hi, It's not a commercial, I even didn't try it, just found this announce. I heard a few questions here about conversion, maybe this device is not so bad to do that. Plextor ConvertX PX-M402U http://www.plextor.com/english/products/ConvertX2.htm

Hi Group, My apologies if this has been posted before, I tried searching but could not find anything. I have taken a lot of home movies and burnt them to DVD. Is it possible to re-capture them back again into my editing program - (I am using Pinnacle Studio V.8), or via a seperate bit of software? I have tried the obvious, trying to load them from within Pinnacle but it did not recognise the...

Following a couple of questions here recently, I've padded out the Basics page on the http://www.camcord.info site to give something about media (DVD etc). -- Tony Morgan http://www.camcord.info

I need to buy an I-link card for my Dell 8300 PC to enable me to capture video from my Sony Digital 8 camcorder. Anybody got any suggestions/recommendations as to which card/manufacturer to buy please.

Hi All, A couple of weeks ago we were speaking about audio channels, total stream width for video DVD, including audio + video, etc. I see that Nero has only 2 choices for audio when we create a video DVD - 1) Dolby Digital (AC-3) 2.0 2) LPCM I understand that LPCM should be used for audio DVDs only and Dolby Digital

Hi All, A couple of weeks ago we were speaking about audio channels, total stream width for video DVD, including audio + video, etc. I see that Nero has only 2 choices for audio when we create a video DVD - 1) Dolby Digital (AC-3) 2.0 2) LPCM I understand that LPCD should be used for audio DVDs only and Dolby Digital

Hi I got a Panasonic NV-GS55(camcorder) that i try to install in WinXP. But winxp thinks that it is a harddisk. The harddisk(camera) is functioning and I have acces to 4 folders, one with pictures. Everytime I start Microsoft Moviemaker and try to capture a video, it says that no camera is installed. I have installed all the drivers and software that came with the camera including the...

Hi is there a place in UK like this http://www.primecell.com/ who repair dead battery in a pack.

Hey all, I just got myself a DV-camcorder, and I'm trying to find out how I can copy the video to my PC for editing and/or converting. The camcorder is a Sony DCR-PC4E and I've got a reasonably new PC with WinXP running. I've asked the guy at the computer store for advice, he said I should check if I have FireWire ports. I checked, I don't think I have any, but I'm not sure because I've never...

I've just been making my first attempts at creating a dvd. I have mpeg files produced by editstudio, and have loaded up the latest demo version of nero. Fundamentally, all seems well, and "sensible-looking" menus appear as designed. So I've managed to create a dvd with 4 videos on it, each with a chapter submenu (if my terminology is correct :-). However, the dvd doesn't stop after playing a...

Hi All, Does anybody know if it's possible to add the same transition effect between all image files easier than inserting it one by one? I created a movie using a huge image collection, and I want now to add a transition effect, one for the whole movie, but I can't! Keeping in mind a couple of thousands of images...))) and IPIV-3200 it's nonsense to do it manually! Please help if somebody...