This charter will be posted once a month to the group, if you do not wish to see / download this posting please set your message filters to ignore the subject line (which will not change). Charter as recorded at http://www.usenet.org.uk/ ====================================== Charter of uk.rec.video.digital (Not Moderated)

Hi all I am having a problem with capturing about 5 seconds of film from my dv camera into the pc its ghosting as if its reading the tape and then laying over the same peice of tape with a slight gap. Its fine if I TV out the dv camera but once its on the pc its ghosting really bad the setup is as follows JVC DVL 30 cameara

On Thu, 3 Jul 2003 12:49:38 +0200, "Dany" wrote: Well, can you tell me where I can find an testing process for my convert application? Without knowing what your application is in detail this would be almost impossible!

zing wrote: Hi, If you have a camcorder with analog input, I would really appreciate it if you would let me know the following: 1. Can analog input on your camcorder be operated without a remote control? No

"Leroy" wrote in message ... Hi all I have been lurking in this group, picking all your brains,as I am completely new to digital camcorders. Unfortunately before I really got started I fell into the canal with my Canon MV530i.I managed to retrieve it from the bottom and have sent it back, luckily it is...

I'm having problems outputting video from Studio 8 to a Panasonic NV-GS70 via IEEE1394 cable. Studio 8 begins the process and I can see my camcorder go into pause and then record mode, the initial frame is frozen (all this seems to be as expected), then when the software switches the camcorder into record mode, it records approx 1 second (probably less) of video and then no more seems to be...

Hi, I'd like to start a business in my local town offering a VHS --- DVD conversion service. I've got a DVD writer but find the area of Video Capture Cards and Editing Software to be very confusing. Can anyone recommend the right kit to use that would be suitable for commercial quality rather than just home use? WinTV seem to do some cheap home products but this kit must be too cheap to use as...

"Denise" wrote in message ... I have a Sony 510A writer but at the moment I'm making more coasters than DVD's. It seems to write ok to datawrite -RW but I'm having about a 50% failure rate with datawrite red -r . I tried copying the DVD made on the RW and although it said it had copied ok, it stops at one point and...

On Sat, 5 Jul 2003 17:02:36 +0100, Tony Morgan wrote: In message , Paul writes I have a problem with Studio 8, I am capturing video from my DV camcorder using a firewire cable......editing it using transitions, fades etc....then I output it using the firewire cable. However I keep getting...

hi there all - thinking of buying a DV camera to be mainly used as a deck for editing (XpressDV and Vegas). I prefer a camera to a deck... I seen some options such as the mv600i and NV-GS50 panasonic and would like some input from people who tried any. I dont need anything fancy such as low-light, mega zoom and stills capture, i just want a basic and reliable camera which will lock well to the pc...

Hi, I wonder if anyone can offer any suggestions for my rather poorly MV300i DV Camera All of a sudden it's just stopped working. It's as if it has just locked up. Just before it died it was displaying messages saying the battery pack was exhausted and that I should remove the tape. When I put a new (charged) battery on it still didn't do anything and the tape will not eject.

I am editing my footage in Vegas and then re-rendering back to avi and converting the file in Procoder to mpeg2 using the svcd template. im then trying to make a svcd in VcdEasy with chapters. when I play the first track in my dvd player (wharfdale M5 with latest firmware) all seems fine but if I skip to next chapter(s) it plays for about 2-3 seconds then freezes. i have tried various settings...

"zing" wrote in message ... Hi, If you have a camcorder with analog input, I would really appreciate it if you would let me know the following: 1. Can analog input on your camcorder be operated without a remote control?

Hi all, I'd have some questions for you experts: 1) How do I join two or more AVI's together? Even if they're already XviD compressed? 2) How do I split an AVI into several pieces? Again, even if they're already XviD compressed? 3) How do I delete some parts of a Xvid compressed AVI, without

Hi all, I'd have some questions for you experts: 1) How do I join two or more AVI's together? Even if they're already XviD compressed? 2) How do I split an AVI into several pieces? Again, even if they're already XviD compressed? 3) How do I delete some parts of a Xvid compressed AVI, without

I was all set to purchase the panasonic then along came the TRV 33 here in Aus, now I am confused. Would love to hear some of your comments as most commercial reviews are mixed and tend to be a little biased. The camera would mostly be used for videos of the kids playing sport etc and for internal video under ordinary house lighting. I have a seperate digital Canon IXUS 330 so I am not...

Just had an E-Mail back from Sony and they say: "The ac power adapter for the DSR-11 is ranging, it will accept a voltage range from 110 to 240volts." Many Regards Peter Just a thought as the unit is both NTSC and PAL I guess you could import one

On 4 Jul 2003 02:41:05 -0700, (zing) wrote: Hi, If you have a camcorder with analog input, I would really appreciate it if you would let me know the following: 1. Can analog input on your camcorder be operated without a remote control?

I am trying to write a VCD Of course, I don't know how you will be using the disc, but if you only want it to be playable on a PC the best way is to just make a normal data cd with the video as a file. This won't play on a normal DVD/VCD player, but will get the film on one disc and (prabably) be of higher quality --

There are actually several ways to do the color space conversion. The mpeg2 decoder that can be found on http://www.mpeg.org/MPEG/MSSG/#source distinguishes the following standards: ITU-R Rec. 709 (1990) FCC ITU-R Rec. 624-4 System B, G SMPTE 170M SMPTE 240M (1987)

"zing" wrote in message ... If you have a camcorder with analog input, I would really appreciate it if you would let me know the following: 1. Can analog input on your camcorder be operated without a remote control? Yes 2. Is the analog input visible on the display even while the camcorder