![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
| |||||||
| UK Digital Video (uk.rec.video.digital) For the discussion of all aspects of digital video, including all digital video formats, camera use, editing, post production & all associated equipment, hardware and software. Advertising is prohibited. |
|
| | Thread Tools | Display Modes |
|
#1
| |||
| |||
| Rite folks, here it is. I'm planning on buying a digital camera (haven't quite decided but leaning towards the Panasonic NVDS650B) and need to make sure my computer will accomadate comfortably my soon-to-be editing demands. I've had alot of experience at college with the software and for editing, but am a complete guppy wen it comes to the hardware side of things. My home computer is an Athlon 900 Mhz (supposedly), with a 256 Mb installed memory, 128 kb and 512 kb primary and secondary memory cache respectively, a 40 Gig hard drive and a Nvidia TNT2 Model 64 Graphics Card. I think i'm ok on the HD side of things, although i may invest in a additional one at some point in the future, but my question is this; My budget won't allow a complete replacement of the main box or motherboard, so wot can i do to beef up my system to handle digital editing, considering there will probably be ALOT of rendering, titles and general madness, as this is supposed to be my coursework for college. Any thoughts? Cheers in advance, Ed |
|
#3
| |||
| |||
| Think again. 1 minute of video could cost you up to 1GB of storage. I'm running a P4 2.4 with 768MB of RAM, 150GB of disk space, and rendering 20 minutes of 2.1MPS video from MovieMaker takes about 10 minutes. I've captured 55 minutes of video to a file of 12GB using FireWire. So you think adding a dedicated editing HD is a good idea? My budget won't allow a complete replacement of the main box or motherboard, so wot can i do to beef up my system to handle digital editing, considering there will probably be ALOT of rendering, titles and general madness, as this is supposed to be my coursework for college. Any thoughts? More memory first. You can edit in chunks or use USB to capture the video at lower resolution. Just be prepared to leave the rendering running overnight. What type of memory do you need? I have a couple of sticks (either 128 or 256 - can't remember) that you can have FOC. Editing in chunks won't be a problem, it's what i was planning on doing anyways. My camera's got DV-in so i'll capture, edit, render and capture back on to tape, edit the next bit and so on. Lower resolution USB isn't an option, though. More memory is definately a plan. Not sure about what type of memory i need though. Also, what about a graphics card? Will this help with rendering/editing/capturing? Thanks alot for the advice though, at least i know where i'm going now. |
|
#4
| |||
| |||
| In article , says... Think again. 1 minute of video could cost you up to 1GB of storage. I'm running a P4 2.4 with 768MB of RAM, 150GB of disk space, and rendering 20 minutes of 2.1MPS video from MovieMaker takes about 10 minutes. I've captured 55 minutes of video to a file of 12GB using FireWire. So you think adding a dedicated editing HD is a good idea? It was for me because I'm using a laptop. I've got an 80GB USB2 external drive. It's nearly half full with the contents of three tapes! My budget won't allow a complete replacement of the main box or motherboard, so wot can i do to beef up my system to handle digital editing, considering there will probably be ALOT of rendering, titles and general madness, as this is supposed to be my coursework for college. Any thoughts? More memory first. You can edit in chunks or use USB to capture the video at lower resolution. Just be prepared to leave the rendering running overnight. What type of memory do you need? I have a couple of sticks (either 128 or 256 - can't remember) that you can have FOC. Editing in chunks won't be a problem, it's what i was planning on doing anyways. My camera's got DV-in so i'll capture, edit, render and capture back on to tape, edit the next bit and so on. Lower resolution USB isn't an option, though. If you render directly to tape you'll be able to save on the disk apce you need. More memory is definately a plan. Not sure about what type of memory i need though. Also, what about a graphics card? Will this help with rendering/editing/capturing? I don't know to be honest, but I wouldn't have thought so. For info. my laptop has a GeForce4 mobile card - that can run Unreal Tournament 2003 at 1024x768 in 24-bit colour quite comfortably. -- Hywel I do not eat quiche http://hyweljenkins.co.uk/ http://hyweljenkins.co.uk/mfaq.php |
|
#5
| |||
| |||
| what software app will you be using to edit with? "Hywel Jenkins" wrote in message t... In article , says... Think again. 1 minute of video could cost you up to 1GB of storage. I'm running a P4 2.4 with 768MB of RAM, 150GB of disk space, and rendering 20 minutes of 2.1MPS video from MovieMaker takes about 10 minutes. I've captured 55 minutes of video to a file of 12GB using FireWire. So you think adding a dedicated editing HD is a good idea? It was for me because I'm using a laptop. I've got an 80GB USB2 external drive. It's nearly half full with the contents of three tapes! My budget won't allow a complete replacement of the main box or motherboard, so wot can i do to beef up my system to handle digital editing, considering there will probably be ALOT of rendering, titles and general madness, as this is supposed to be my coursework for college. Any thoughts? More memory first. You can edit in chunks or use USB to capture the video at lower resolution. Just be prepared to leave the rendering running overnight. What type of memory do you need? I have a couple of sticks (either 128 or 256 - can't remember) that you can have FOC. Editing in chunks won't be a problem, it's what i was planning on doing anyways. My camera's got DV-in so i'll capture, edit, render and capture back on to tape, edit the next bit and so on. Lower resolution USB isn't an option, though. If you render directly to tape you'll be able to save on the disk apce you need. More memory is definately a plan. Not sure about what type of memory i need though. Also, what about a graphics card? Will this help with rendering/editing/capturing? I don't know to be honest, but I wouldn't have thought so. For info. my laptop has a GeForce4 mobile card - that can run Unreal Tournament 2003 at 1024x768 in 24-bit colour quite comfortably. -- Hywel I do not eat quiche http://hyweljenkins.co.uk/ http://hyweljenkins.co.uk/mfaq.php |
|
#6
| |||
| |||
| Adobe Premiere alongside After Effects probably. Thanks for the excellent adive by the way Hwell, TIA Ed |
|
#7
| |||
| |||
| Sorry typo there, meant to say Hywel* |
|
#8
| |||
| |||
| "Edmund St. Geoge Willamus III" wrote in message om... Adobe Premiere alongside After Effects probably. Thanks for the excellent adive by the way Hwell, Which version of Premiere, if you are thinking about 'Pro' forget it !... |
|
#9
| |||
| |||
| In article , says... "Edmund St. Geoge Willamus III" wrote in message om... Adobe Premiere alongside After Effects probably. Thanks for the excellent adive by the way Hwell, Which version of Premiere, if you are thinking about 'Pro' forget it !... Why? -- Hywel I do not eat quiche http://hyweljenkins.co.uk/ http://hyweljenkins.co.uk/mfaq.php |
|
#10
| |||
| |||
| "Hywel Jenkins" wrote in message t... In article , says... "Edmund St. Geoge Willamus III" wrote in message om... Adobe Premiere alongside After Effects probably. Thanks for the excellent adive by the way Hwell, Which version of Premiere, if you are thinking about 'Pro' forget it !... Why? Adobe apparently say that 'Pro' won't run properly with AMD CPU's, and CV magazine couldn't get 'Pro' running on a AMD chipped system when they reviewed the software - which is all rather a pity as one can build a duel AMD system for not much more than a single P4 3 Gig 800Mhz system. If you know different though.... |
|
| Thread Tools | |
| Display Modes | |
|
|