I am unable to get Studio 8 to output a rendered video to my DV
camcorder via th IEEE-1394 link. The camcorder starts and the tape
advances by the duration of the rendered video but nothing is
recorded. My PanasonicCamcorder model NV-DS33 has had the DV-in
enabled. Can anyone advise how I can overcome this problem please.

Gordon Wilkinson

In message , Gordon
Wilkinson writes
I am unable to get Studio 8 to output a rendered video to my DV
camcorder via th IEEE-1394 link. The camcorder starts and the tape
advances by the duration of the rendered video but nothing is
recorded. My PanasonicCamcorder model NV-DS33 has had the DV-in
enabled. Can anyone advise how I can overcome this problem please.

Spooky...
Haven't really an idea what might be wrong, but I'd try (in this order):

1. Update Studio 8 to the latest version (I believe it's free - at
least
it was up to 8.5).
2. Make sure your Windows version is up-to-date.
3.. Run EndItAll before you start.
4. Disconnect all your USB cables.
5. Try another Firewire cable.
6;. Try another Firewire card.

Sorry that I can't be more specific. Unless perhaps the DV-in enabling
didn't work properly. I've heard that late versions of some camcorder
models can't be DV-in enabled (although older versions of the same
camcorder model could).
--
Tony Morgan
http://www.camcord.info

I am unable to get Studio 8 to output a rendered video to my DV
camcorder via th IEEE-1394 link. The camcorder starts and the tape
advances by the duration of the rendered video but nothing is
recorded. My PanasonicCamcorder model NV-DS33 has had the DV-in
enabled. Can anyone advise how I can overcome this problem please.


The first thing to try is to take the camera to a friend's system, and
see if it will record dv from that.