![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
| |||||||
| UK Digital Video (uk.rec.video.digital) For the discussion of all aspects of digital video, including all digital video formats, camera use, editing, post production & all associated equipment, hardware and software. Advertising is prohibited. |
|
| | Thread Tools | Display Modes |
|
#11
| |||
| |||
| In message , DanG writes "John" wrote in message .. . Can anyone advise what type of glossy paper (weight wise) is about right for the DVD covers that go inside the plastic on the outside of the DVD? e.g. 100gsm, 120gsm? Some of the DVDs I have the paper does seem pretty thin but when I have been looking for glossy paper for this I don't seem to have been able to find much below about 190gsm. Thanks, John Most any high-res inkjet paper will suffice, since they all look about the same under the plastic covers. I use good quality coated 32# premium matte inkjet paper, whatever is on sale. The real DVD cover is printed on bond paper, like a magazine. The printing method is completely different, but roughly corresponds to about a 150 DPI inkjet print in terms of resolution. Not so. Standard commercial printing is at 1248 dpi. This comprises the four color separations - magenta, cyan, yellow and black (known as CMYK) with 312 dpi for each of these four colors. Art reproductions and other high-quality printing use a different color model, known as CMYKOG (otherwise as the Pantone color model). They are printed at 2460 dpi (410 dpi for each of the six "colors"). Each of the "colors" is printed at a specific angle relative to one another to avoid moire effects. It's significant that commercial printing uses inks that are "solid" in color. Inkjet printers use transparent inks, so the colors will bleed with one another - so registration is not as much an issue as it is with commercial printing where dot-separation is important.. In response to other posts in this thread, inkjet papers are available that will print well at high dpi's (Aldi periodically sell such papers). You can also obtain double-sided coated light card for inkjets - you might see this type of paper on the shelves at PC World, and is commonly used for producing greeting cards on your computer's printer. Although the OP was talking about case inserts, it should perhaps be mentioned that Epson sell an excellent printer that allows you to print directly onto the surface of CDs and DVDs. You obviously have to used disks that are labelled "printable" which can be recognised by their plain white matt surface. I originally had a Epson R200, but I now use an Epson R285 - both models reproduce excellent quality photos/graphics on CDs and DVDs. -- Zillion |
|
#12
| |||
| |||
| Just bring a memory stick to FedEx Kinkos. They charge about $0.59 per copy. Consider the cost of ink cartridge you might be better off by using FedEx Kinkos. But if you need to get a larger run, consider hiring professional DVD duplicator such as New Cyberian, http://www.newcyberian.com "measekite" wrote in message ... goto www.surething.com John wrote: Can anyone advise what type of glossy paper (weight wise) is about right for the DVD covers that go inside the plastic on the outside of the DVD? e.g. 100gsm, 120gsm? Some of the DVDs I have the paper does seem pretty thin but when I have been looking for glossy paper for this I don't seem to have been able to find much below about 190gsm. Thanks, John |
|
#13
| |||
| |||
| Can anyone advise what type of glossy paper (weight wise) is about right for the DVD covers that go inside the plastic on the outside of the DVD? e.g. 100gsm, 120gsm? Some of the DVDs I have the paper does seem pretty thin but when I have been looking for glossy paper for this I don't seem to have been able to find much below about 190gsm. Retail commercial DVD covers aren't printed with inkjets, inkjet paper for a gloss finish is thicker (and may have moire problems agaist the outer plastic), try a matt inkjet paper. A much better bet is a colour laser, then experiment with papers, try to avoid coated papers in lasers. |
|
#14
| |||
| |||
| John wrote: Can anyone advise what type of glossy paper (weight wise) is about right for the DVD covers that go inside the plastic on the outside of the DVD? e.g. 100gsm, 120gsm? Some of the DVDs I have the paper does seem pretty thin but when I have been looking for glossy paper for this I don't seem to have been able to find much below about 190gsm. Thanks, John I use the glossy brochure paper. It's thin and glossy like photo paper, makes the color ink really stand out and foldable without cracking. Rose |
|
| Thread Tools | |
| Display Modes | |
|
|