|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
| |||||||
| UK Digital Video (uk.rec.video.digital) For the discussion of all aspects of digital video, including all digital video formats, camera use, editing, post production & all associated equipment, hardware and software. Advertising is prohibited. |
| | Thread Tools | Display Modes |
|
#1
January 24th 05, 12:44 PM
posted to uk.rec.video.digital
| |||
| |||
 Dead MV10 I have a completely dead MV10. a DC supply of 12 V and unknown polarity was stuffed into the (7.2V?) dc in jack. This may be coincidental ..I opened the thing up to see if there was a blown fuse or regulator circuit - I cant find a fuse. There is a small board on which is (amonst other things) a 4-way (or was it 6-way) conector that routes red/black power from the battery to this (regulator?) board and also routes red/black DC in to the other circuits. Power from the battery is good. Power from this board is good. Would appreciate any clues to try next, or tips for removing the tape. TIA, Mal   |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
